magazine logo
Welcome to the official Attitude website - Europe's #1 C64 scene disk magazine
Backing Up Your Precious Data
by MtnBuffalo/Triad

ARE DATA BACKUPS FOR SISSIES?

Some of us still have heaps of old 5.25 inch floppies laying around. It is well known that data stored on this type of media is not the safest place to keep it. While most of the data can quite easily be found online (i.e. games and demos) in the case of data loss, some data may be more valuable to some than others. Like the crude animation of my dreaded gym teacher from primary school that I wrote in BASIC with a buddy of mine. This nostalgic piece of code, showed to our cheering classmates at my 13th birthday, has been lost to the eternal bit fields as I did not back it up in time... I therefore decided to look through the rest of my pile of diskettes and check for other hidden treasures. The question is how to do this as easy as possible?

Even though, it is possible to back up Commodore 64 data to other storage devices (like a SD2IEC or 1541 Ultimate II, using a modern-day computer seems like the easier approach. This way disks can be copied without the need of a Commodore 64 machine. In this context, the XU1541 devices can be used to interface PCs with IEC devices like the Commodore 1541, 1571 or 1581 Diskette drives.


The devices can even interface with the WinVICE emulator allowing to run games and programs directly from the diskette drive and executed on the modern hardware.

WHAT IS THE XU1541 INTERFACE?

The XU1541 interface is a way to connect Commodore IEC bus devices to the USB port of modern day computers. This way data can easily be transferred between diskettes and the hard drive of a PC. The interface does not transform the diskette drives into a mass storage USB device like, e.g. a memory stick. It simply allows sending low level IEC commands back and forth through the USB interface. This in turn gives direct access to the content of the disk drive and the software on the diskettes. However, there are some shortcomings of the XU1541 interface. Due to the simplicity of the design, it does not have nibbler support and therefore copy protected data cannot be transferred through the device. The device is supported by the software called OpenCBM which enables control of the disk drive from the PC and includes disk reading, disk formatting, single file copying (.d64 and .prg files) to and from disk.

As there are several implementations of the XU1541 available, I decided to include two of them in this review: the XU1541 Interface and the USB2IEC. The former is created by Spiro Trikaliotis and the latter by 16xEight Digital Retrovation. Both of them are readily available online from Ebay (retronics.eu) and 16xEight Digital Retrovation (16xeight.de).

THE HARDWARE

The XU1541 Interface Box from Retronics.eu comes in a sturdy plastic box with a choice of two colors, white/grey and black). I opted for the black version. On top of the case are LEDs for power (blue) and busy (red) signals. The front holds the USB plug for connecting the included USB cable to a PC and an IEC port for connecting the diskette drive. According to the manufacturer the device supports 1541, 1571, 1581 and is the improved SMD version. The XU1541 device works with MS windows XP/Vista/7/8. If for some unknown reason one wants to load a game or program from diskette and use the Vice emulator to run it, this should also possible (I did not test this though!). The device costs 37$ plus shipping from Poland.

The USB2IEC device from 16xEight Digital Retrovation is basically a small (20x50 mm) blue rectangular printed circuit board with an USB plug in one end and a female IEC plug in the other end. The components are not protected inside a case or shrink wrap and the device is plugged directly into an USB port of a modern-day computer. The USB2IEC works with MS Windows XP/7 and supports Commodore 1540, 1541, 1541-II, 1570, 1571 and 1581 diskette drives. The device costs 21$ plus shipping from Germany.

DATA TRANSFER TEST BENCH

As I only own a Commodore 1541 diskette drive and already have a MS Windows XP machine that I use for my EPROM burner, all tests were performed on this system. Drivers and software for the XU1541 Interface Box were included with the purchase. The main interface program for transferring data between the 1541 drive and the Windows PC is called CBMXfer and looks like something from the Windows 98 era. On the left side of the program window is the source directory on the local PC found while the right side holds information of the Commodore drive that it attached to the IEC cable.

Drivers, manual and interface software for the can be downloaded from the 16xeight Digital Retrovation website. The manual is in German but the installation is pretty much self-explanatory. The interface software is called GUI4CBM4WIN and when running the setup file, CBMXfer is also installed.

I divided the test into four parts. First, I wanted to transfer a diskette holding a copy of a single file game (Buggy Boy) to the PC. I then wanted to copy an entire diskette to the PC in .D64 file format. I then wanted to use the software to format the diskette and finally transfer back the newly created files.

TEST RESULTS

It soon came clear that both devices can be run interchangeably regardless of programs used. In fact, I was not able to detect any differences in regard to transfer speed, access time, functionality or installation of Windows drivers. Both the XU1541 Interface Box and the USB2IEC device managed to transfer single .PRG files, entire diskette images in .D64 format, format a diskette and transfer data back to the floppy.

The biggest difference was found in the functionality of the software. The CBMXfer had the ability to create .D64 files while GUI4CBM4WIN had a neat logging window to see the progress of a current job. However, this may be related to the software version that the devices came with as updated software versions may include both options.

FINAL THOUGHTS

Why even bother fiddling around with the old floppies when devices like the SD2IEC or the 1541 Ultimate are so much easier to use? Well, I see the greatest use for the XU1541 devices for backing up old floppies before they get erased by time. After transferring data from the floppies, disk images can be created and used on more modern C64 add-ons like the 1541 Ultimate II.

The XU1541 devices are also a great approach for those who likes the good old floppy format and finds the clonking sounds from the diskette drive as soothing as hi-fi enthusiasts love the low static noise coming from an old record. Using either of the devices, transferring new games or programs to a hard disk is a breeze.

So, which one is better of the included devices? Well, they do the exact same thing, at the same speed and the software can be used interchangeably. If money is not an issue or the open design of the USB2IEC kinda scares you (which I really do not think there is any reason to!), I would go with the boxed version with the flashing LEDs from retronics.eu. However, if all I need from the device is to transfer data between a PC and a diskette drive, I would definitely go with the cheaper version from 16xEight Digital Retrovation.

Whichever device is chosen, they will both fulfill all your C64 diskette drive transfer needs without having to turn on your Commodore 64 machine. Now I just wish that I had backed up the little BASIC program that I made back in the days with that crude animation (with the not so nice undertones) of our dreaded gym teacher...

MTNBUFFALO/TRIAD

   Add/view comments on this article (comments: 0)

SCENE GROUPS
 
OPINION POLL
Do you believe we are
able to cope with
releasing "Attitude"
on a regular basis?

yes no

 YES: 281 (70.60%)
NO:117 (29.40%) 

NEWS COMMENTS

ART COMMENTS

STATISTICS
all visits:

visits today:


website started:
23/09/2004
 
Official Webpage
of Attitude
Copyright 2004-2018
 
DJ Gruby/TRIAD